Skip to content

51 phones Every spec sourced

Phone Factory
Menu

Glossary

Phone Factory guide

Verified 2026-11-03

Watts, Volts and Amps: Phone Charging Basics

Charger labels list several voltage and current pairs, and the wattage is what you compare. This entry shows how the numbers relate and where the published figures come from.

How do watts, volts and amps relate?

Wikipedia’s volt-ampere article says that for a simple DC circuit the real power, measured in watts, is the product of the current in amperes and the voltage, and that one volt-ampere equals one watt. That is the rule behind every charger label. The USB Power Delivery figures below follow it.

VoltageCurrentPowerWhere it comes from
5 V1.5 A7.5 WBattery Charging 1.2, released in 2010
20 V5 A100 WThe top of USB PD’s Standard Power Range before revision 3.1
48 V5 A240 WThe top of the Extended Power Range in revision 3.1

Why does a charger list several voltages?

A USB PD charger offers more than one level, and the phone picks one. Wikipedia describes the Standard Power Range as four fixed voltages, 5, 9, 15 and 20 V, and the Extended Power Range as 28, 36 and 48 V. The optional PPS feature allows finer control, in a range of 3.3 V to 21 V in 20 mV steps. See USB Power Delivery for how the negotiation works.

Does a higher-wattage charger charge my phone faster?

Not beyond what the phone supports. Samsung says the device chooses the fastest speed it supports, and the USB-IF says certified fast chargers stay backwards compatible with USB Type-C and USB Power Delivery devices. The wattage on the charger is a ceiling, and the phone sets the actual draw. Read which charger is safe for my phone before buying.

Which watt figures do our phone pages list?

We publish a wired wattage only when the maker states one for the phone. Eighteen of our 51 phones have one, and the wattage guide collects them by charging type. A blank means the maker did not state a figure on the page we sourced, not that the phone charges slowly.

Glossary, fast charging, USB Power Delivery, PPS, wattage guide, chargers hub.

Frequently asked questions

Q01

How do I calculate watts from volts and amps?

Multiply them. Wikipedia says that for a simple DC circuit the real power in watts is the current in amperes times the voltage, so 9 volts at 2 amps is 18 watts.

Q02

What voltages does USB Power Delivery use?

Wikipedia says the Standard Power Range uses four fixed levels, 5, 9, 15 and 20 volts, and revision 3.1 added 28, 36 and 48 volts in an Extended Power Range, giving up to 240 watts at 48 volts and 5 amps.

Q03

Is a higher-wattage charger safe for my phone?

A certified charger offers several levels and the phone requests the one it supports. Samsung says the device chooses the fastest speed it supports. Buy certified products from trusted sources, as the USB-IF advises.

Q04

What do 5V, 9V and 20V mean on a charger?

They are the voltage levels the charger can offer. A USB PD charger lists several, and the phone and charger agree on one. Multiply each voltage by its current rating to get the watts available at that level.

Q05

What is the difference between watts and volt-amperes?

Wikipedia says watts measure real power, the power actually dissipated in a load, while volt-amperes measure apparent power in AC circuits. In simple DC charging, the two are the same number.

Q06

Where do I find my phone's charging wattage?

On the maker's specification page, when the maker states one. Our phone pages show a wired wattage for 18 of the 51 phones and leave it blank otherwise, because we record only what the maker states.

Sources & last verified

Last verified:

How we source facts: see our Editorial Policy.