Skip to content

51 phones Every spec sourced

Phone Factory
Menu

Glossary

Phone Factory guide

Verified 2026-11-03

What Is an IP Rating on a Phone?

IP stands for ingress protection. The rating on a spec sheet is a lab result, not a promise about your accident. This entry decodes the digits and shows what our library lists.

What do the two digits mean?

Wikipedia says the first digit (0 to 6, or X) covers solids and the second (0 to 9, or X) covers water. An X means no data was available to assign a level, and 0 means no protection.

DigitLevelWhat Wikipedia says
First 5Dust protectedDust may enter, but not enough to interfere with safe operation
First 6Dust-tightNo dust ingress; a vacuum is applied, with a test of up to 8 hours
Second 4SplashingWater splashed from any direction
Second 5Water jets6.3 mm nozzle, 12.5 L/min, at least 3 minutes
Second 6Powerful jets12.5 mm nozzle, 100 L/min, at least 3 minutes
Second 7ImmersionLowest point 1,000 mm below the surface, or highest point 150 mm below, whichever is deeper
Second 8Continuous immersionDepth specified by the manufacturer, generally up to 3 m
Second 9Hot high-pressure sprayWater at 80 degrees C, 8 to 10 MPa, 14 to 16 L/min

Ratings are not cumulative beyond IPX6, so a device can meet IPX7 without meeting IPX5 or IPX6. A dual rating is written with a slash, such as IPX5/IPX7.

Which IP ratings do the phones in our library list?

These are the ratings recorded on our phone pages, as the makers state them.

RatingPhones
IP68Most, including the iPhone 11, iPhone 12 and later (not the SE), Galaxy S24 and S25
IP68 with IP69 listedMoto Edge (2026), Moto G Stylus (2026), Moto G Power (2026)
IP67iPhone SE (3rd generation)
IP64Galaxy A27 5G
IP54Galaxy A16 5G, A17 5G
IP48Galaxy Z Fold8, Z Fold8 Ultra, Z Flip8 and the three Razr (2026) phones

Does an IP rating cover salt water, soap or hot water?

No. Wikipedia says standard IP testing uses fresh water and that salt water, oils and solvents are not covered by the rating. Samsung says its resistance is for fresh water and that hot, soapy, chlorinated and salt water should be avoided. Apple says splash, water and dust resistance are not permanent and might decrease with normal wear. See what to do if your phone gets wet.

Glossary, what to do if your phone gets wet, repair hub, phone library.

Frequently asked questions

Q01

What does IP68 mean?

The 6 means dust-tight, with no dust ingress in Wikipedia's description of the test. The 8 means continuous immersion to a depth the manufacturer specifies, generally up to 3 m. Read the maker's page for the actual depth and time.

Q02

Is IP68 the same as waterproof?

No. The rating is a laboratory result in fresh water. Apple says splash, water and dust resistance are not permanent and might decrease with normal wear, and Samsung says a dropped or damaged device may lose some of its resistance.

Q03

What does the X in IPX8 mean?

Wikipedia says an X means no data is available to assign a protection level for that criterion. IPX8 therefore states a water level and makes no claim about dust, and the manufacturer specifies the depth.

Q04

What does IP69 mean?

Wikipedia describes the second digit 9 as high-pressure, high-temperature spray: water at 80 degrees C, 8 to 10 MPa and 14 to 16 L/min. Three Motorola phones in our library list IP69 alongside IP68.

Q05

Does an IP rating cover salt water?

No. Wikipedia says the rating covers fresh water only and that salt water, oils and solvents need separate testing. Samsung says to avoid hot, soapy, chlorinated, ionized and salt water with its phones.

Q06

Which phones in your library have the lowest ratings?

The Galaxy A16 5G and A17 5G list IP54, whose water digit 4 means splashing water. The foldables and Razrs list IP48: a strong water digit of 8, but a first digit of 4, below the 5 or 6 on phones that list dust protection.

Sources & last verified

Last verified:

How we source facts: see our Editorial Policy.