What Is a Battery Cycle?
Cycles are how makers measure battery wear. A phone does not lose a cycle each time you plug it in, so this entry shows how the count works and what each maker publishes.
How is a charge cycle counted?
Google defines one cycle as a full discharge and recharge, with partial discharges adding up. Using 50 percent of the battery and recharging counts as 0.5 cycles. Wikipedia’s lithium-ion article adds that manufacturers usually define cycle life as the number of cycles until capacity drops to 80 percent of the rated figure.
How many cycles do the makers publish?
| Phone | Cycles to 80 percent capacity | Source |
|---|---|---|
| iPhone 14 models and earlier | 500 complete charge cycles | Apple |
| iPhone 15 models | 1,000 complete charge cycles | Apple |
| Pixel 3 through Pixel 8 Pro and Pixel Fold | About 800 cycles | |
| Pixel 8a and later | About 1,000 cycles |
Apple’s page names iPhone 15 models for the 1,000-cycle figure, so check Apple’s page for newer iPhones. Samsung’s page gives no cycle figure, and we do not estimate one. These are design targets, and real wear depends on use, heat and charging habits.
Where can I see my cycle count?
On a Pixel 8a or later, Google says to open Settings, About phone, Battery information. Apple’s Settings, Battery, Battery Health screen shows maximum capacity and peak performance capability. For Samsung, the Samsung Members app runs a battery diagnostic. Our battery replacement timing guide lists the paths and what each maker counts as worn.
What happens at 80 percent?
The makers use 80 percent as the benchmark for a worn battery. Google says a Pixel battery health reading of Reduced means capacity below 80 percent and recommends considering a replacement. Our library has an iFixit battery guide recorded for 20 of the 51 phones; see battery replacement basics.
Related
Glossary, lithium-ion batteries, optimized battery charging, when should I replace my phone battery, battery replacement basics.